分享个给远程3389中转加速的nftables配置。

免费的的

鉴于最近本地挂代理被请去喝茶的朋友越来越多，就把自己的母鸡给朋友开了两台3389远程挂tg聊天、刷pt用，因为太卡，又买了个9929线路中转

查了好几个，但很多编辑nftables.conf的教程我照抄了老不起作用。。后来发现了这个还挺好使，后期加端口也简单。
大佬轻喷，菜鸡拿去用。

在9929上新建配置。

1. /etc/nftables/example.nft

复制代码

然后在

1. /etc/nftables.conf

复制代码

文件里最底下加一行

1. include "/etc/nftables/example.nft"

复制代码

/etc/nftables/example.nft 的文件如下图所示

1. define localIP = 本地IP（9929、cn2）define remoteIP = 需要加速的IP（拉跨线路）define remotePort = 远程端口define localPort = 本地端口define remotePort2 = 远程端口2define localPort2 = 远程端口2#我远程和本地用一个端口。免得混淆。网上说用不一样的会有未知Bug.# Flush the rule set#flush rulesetadd table ip natadd chain nat PREROUTING { type nat hook prerouting priority -100 ; }add chain nat POSTROUTING { type nat hook postrouting priority 100 ; }add rule ip nat PREROUTING tcp dport $localPort counter dnat to $remoteIP:$remotePortadd rule ip nat PREROUTING udp dport $localPort counter dnat to $remoteIP:$remotePortadd rule ip nat POSTROUTING ip daddr $remoteIP tcp dport $remotePort counter snat to $localIPadd rule ip nat POSTROUTING ip daddr $remoteIP udp dport $remotePort counter snat to $localIPadd rule ip nat PREROUTING tcp dport $localPort2 counter dnat to $remoteIP:$remotePort2add rule ip nat PREROUTING udp dport $localPort2 counter dnat to $remoteIP:$remotePort2add rule ip nat POSTROUTING ip daddr $remoteIP tcp dport $remotePort2 counter snat to $localIPadd rule ip nat POSTROUTING ip daddr $remoteIP udp dport $remotePort2 counter snat to $localIP

复制代码

沭沭沭沭沭小锐

菜鸡收藏